FREE SHIPPING WORLD WIDE FROM DEC 1ST TILL JANUARY 5TH

TFX Suspension
☰

Ready for TFX?

Get in touch with a shock
specialist now !

Not sure which setup fits your riding style?

Motorcycle shock absorber spring coils at maximum preload setting in a dim, dusty garage with dramatic side lighting.

Wat gebeurt er als ik na de vakantie vergeet de preload terug te draaien?

If you forget to wind the preload back after a holiday, your suspension will be set too stiff for your normal solo riding weight, making the bike feel harsh, nervous, and harder to control on everyday roads. The spring is compressed more than it needs to be for your standard load, so the suspension cannot absorb bumps and surface changes the way it was designed to. The sections below walk through exactly what that means for your ride feel, your tyres, your safety, and how to find your correct base setting.

How does riding with the wrong preload setting actually feel?

Riding with too much preload for your current load makes the bike feel stiff, skittish, and unresponsive to small road imperfections. The suspension sits higher in its travel than intended, so bumps that would normally be absorbed are instead transmitted directly through the chassis to your hands and seat. You may also notice the front end feels light and the steering becomes twitchy at speed.

In practice, this often shows up as a bike that bounces or skips over rough patches rather than tracking through them smoothly. On motorways, the ride can feel relentlessly firm. On bends, the rear may feel like it is pushing you wide rather than following the line you choose. Many riders assume the road is simply bad, when the real cause is a spring that is loaded for 30 kilograms of luggage and a pillion that simply are not there any more.

The opposite problem, too little preload after removing holiday weight, is less common in this scenario but worth understanding for comparison. Too little preload causes the suspension to sag excessively, making the bike feel wallowy and slow to respond. With holiday preload still dialled in on an unladen bike, you are firmly in the too-stiff territory, and the ride quality and handling both suffer for it.

What does incorrect preload do to your tyres and chassis?

Incorrect preload changes the geometry of the bike, which directly affects how your tyres contact the road. When the rear sits too high due to excess preload, the steering geometry shifts, putting more weight on the front tyre and altering the contact patch shape on the rear. Over time, this leads to uneven tyre wear, reduced grip, and faster degradation in the overloaded areas of the tread.

Beyond the tyres, running the wrong preload puts additional stress on your suspension components. The shock absorber and spring are designed to operate within a specific range of movement. When preload is set too high for the actual load, the suspension spends more time near the top of its travel and has less room to compress over sharp impacts. This means the bump stops take more hits than they should, and the internals of the shock absorber work harder to compensate for the geometry mismatch.

Chassis stress is a slower, less visible consequence. Repeated hard landings from bumps that the suspension fails to absorb properly transfer energy into the frame, swingarm, and steering head bearings. None of this causes immediate failure, but it accelerates wear on components that are expensive and time-consuming to replace. Keeping preload correctly set is one of the simplest ways to protect the long-term health of your motorcycle.

Is riding with holiday preload dangerous on normal roads?

Riding with holiday preload on normal roads is not immediately catastrophic, but it does meaningfully reduce your safety margin. The bike handles less predictably, braking distances can increase slightly because the tyre contact patches are not optimised, and your ability to make quick, precise corrections in an emergency is reduced. The risk is real, even if it is gradual rather than sudden.

The danger is most pronounced in two situations. First, at higher speeds on motorways, where the nervous, high-riding rear makes the bike more sensitive to crosswinds and surface changes. Second, in slow, technical situations such as roundabouts or tight bends, where the altered steering geometry makes the bike feel reluctant to lean and change direction. Both situations demand confident, predictable handling, and excess preload works against that.

It is also worth noting that the danger compounds with other variables. If your tyres are already worn, if the roads are wet, or if you are carrying even a modest amount of luggage on top of the already-high preload setting, the handling degradation adds up quickly. Resetting preload after every significant load change is a small habit with a disproportionately large impact on safety.

How do you know what your correct base preload setting is?

Your correct base preload setting is determined by measuring sag, which is the amount the suspension compresses under the weight of the bike and rider in a normal riding position. For most motorcycles, rear sag with the rider seated should be between 25 and 35 millimetres, and free sag (the difference between the fully extended measurement and the unloaded static measurement) should be between 5 and 15 millimetres.

How to measure rider sag

To measure rider sag, you need a helper and a tape measure. Start by measuring the distance between a fixed point on the rear axle and a fixed point directly above it on the subframe or seat unit, with the bike fully off the ground or on a paddock stand. Then measure the same points with the rider seated in their normal riding position and feet on the pegs. The difference between the two measurements is your rider sag.

If the number is below 25 millimetres, your preload is too high and needs to be reduced. If it is above 35 millimetres, your preload is too low and needs to be increased. Adjust the preload collar or ring on your shock absorber in small increments and re-measure until you land in the correct range. This measurement should always be taken with your typical riding gear on, since kit and helmet add meaningful weight.

What affects your base setting between trips

Your base preload setting is not fixed forever. It can drift as your spring ages and loses some of its rate, as you change riding gear, or if your own weight changes significantly. It is good practice to check sag at the start of each riding season rather than assuming last year’s setting is still accurate. A quick 10-minute check each spring keeps your handling consistent and your safety margins where they should be.

When should preload be adjusted beyond just holiday packing?

Preload should be adjusted any time the total load on the bike changes significantly from your baseline. This includes riding with a pillion, adding or removing luggage, fitting a top box, or even swapping to heavier riding gear for winter. Each of these changes shifts the weight the suspension must manage, and a preload setting dialled in for one configuration will be wrong for another.

Adventure and dual-sport riders face this more than most, because their load varies dramatically between a solo day ride and a multi-day tour with full camping equipment. A well-set-up bike for a solo run in the mountains handles completely differently when loaded with 25 kilograms of kit and a tank bag. Preload adjustment is the quickest and most accessible tool for bringing that handling back into line without touching damping or spring rate.

There are also situations beyond load changes where preload adjustment is worth considering. If you switch to a different road surface for an extended period, such as spending a week on gravel tracks, a slight reduction in preload can help the suspension stay more active and compliant. If you are riding two-up consistently for a season, it is worth setting preload for that configuration and keeping a note of your solo setting so you can switch back quickly. Treating preload as a dynamic, regularly revisited setting rather than a set-and-forget number is the mindset that separates riders who genuinely get the most from their suspension from those who simply tolerate what the bike gives them.

How We Help You Get Preload Right

Getting preload right is straightforward once you know what you are looking for, but finding the ideal setup across different loads, riding styles, and terrains is where a properly engineered suspension system makes a real difference. At TFX Suspension, we build and tune suspension specifically around the individual rider rather than a generic average, so your base setting actually means something.

Here is what we offer to help you stop guessing and start riding with confidence:

  • Custom suspension tuning: We set spring rates, preload, and damping based on your weight, riding style, and the terrain you cover most often, so your base setting is genuinely correct for you from the start.
  • Adventure-specific shock absorbers: Our Traveler and Freelexer series are designed for riders who move between loaded touring and solo riding, with easy-adjust preload systems that make switching between configurations quick and repeatable.
  • Servicing and recalibration: If your suspension has drifted over time or you have changed your riding setup significantly, we can recalibrate your system so your preload reference points are accurate again.
  • Brand-specific fitment: Whether you ride a CFMoto adventure bike or another platform, we supply suspension matched to your specific model and use case.

If you are not sure whether your current setup is working for you, or you want a suspension system that genuinely keeps up with how and where you ride, get in touch with us to discuss your setup. You can also browse our full range of shock absorbers or explore CFMoto-specific suspension options directly. For a full overview of what we do, visit TFX Suspension and see how we approach suspension differently.

Frequently Asked Questions

How often should I check and reset my preload setting throughout the riding season?

You should check your preload any time your load changes significantly — before and after every touring trip, when adding or removing a pillion, and at the start of each new riding season. A quick sag check takes around 10 minutes and is one of the highest-value maintenance habits you can build. If you ride year-round or switch between very different setups regularly, consider keeping a small notebook or phone note with your confirmed sag measurements for each configuration so you can reset quickly without re-measuring from scratch every time.

Can I adjust preload myself, or do I need a mechanic to do it?

Most motorcycles allow you to adjust rear preload yourself using a C-spanner (supplied with many bikes) or a peg-and-hammer tool, both of which are inexpensive and widely available. The process involves turning the preload collar or ring on the shock absorber and then re-measuring sag until you hit your target range of 25–35mm. Some modern bikes with electronic suspension can adjust preload via a menu setting. The only time you genuinely need a mechanic or suspension specialist is if your shock absorber lacks external preload adjustment, requires a spring swap to get the right rate, or if the internals need servicing.

What if I can't get my sag into the correct range even after adjusting preload all the way in or out?

If you’ve wound preload to its maximum and sag is still too high, or backed it off completely and sag is still too low, the problem is almost certainly the wrong spring rate for your weight rather than a preload issue. Preload only changes where in the spring’s travel the suspension sits — it cannot compensate for a spring that is fundamentally too stiff or too soft for the rider. In this case, fitting a spring with the correct rate for your weight is the right fix, and a suspension specialist like TFX can advise on the correct spring rate based on your weight, gear, and riding style.

Does incorrect preload affect the front suspension as well, or is it mainly a rear-end issue?

While rear preload adjustment is the most common and accessible setting on most motorcycles, incorrect rear preload absolutely affects the front end too. When the rear sits too high due to excess preload, the bike’s geometry tilts forward, increasing the load on the front tyre and steepening the steering head angle — which is why the front can feel twitchy and nervous. Some bikes also offer front preload adjustment via fork caps, and setting both ends correctly in proportion to each other is what gives you balanced, predictable handling rather than just fixing one end in isolation.

Is there a quick on-the-road check I can do if I don't have a tape measure or a helper with me?

A rough field check is to sit on the bike in your normal riding position and have someone observe how the suspension looks relative to the full travel range — though this is far less accurate than a measured sag check. A more practical approach is to note how the bike feels immediately after a load change: if it feels noticeably harsher, more skittish, or bounces over bumps it previously absorbed, that’s a strong indicator your preload is too high for the current load. Use this as a prompt to do a proper sag measurement at your next stop, rather than relying on feel alone as your final reference.

Does spring age or wear affect how I should interpret my preload setting over time?

Yes — springs do lose rate gradually over years of use, meaning a spring that was correct for your weight when new may become slightly too soft over time, causing the suspension to sag more than it should even at the same preload setting. If you find yourself needing to add significantly more preload than you used to in order to hit your target sag measurement, that’s a sign the spring may be fatiguing. An annual sag check at the start of the season will catch this drift early, and a suspension service or spring replacement will restore your handling to where it should be.

Should I adjust preload differently for long motorway touring versus technical off-road or gravel riding?

Yes, and the adjustment direction is different for each. For motorway touring with luggage, you’ll want to increase preload to compensate for the added weight and keep sag in the correct range, which maintains stability at speed. For gravel or technical off-road riding, a slight reduction in preload (even on a solo, unladen bike) allows the suspension to sit a little lower in its travel and remain more active and compliant over unpredictable surfaces. The key principle is always the same — match preload to the actual load and terrain — but the ideal target sag may shift slightly toward the softer end of the acceptable range for off-road use to maximise wheel tracking and traction.

Configure Your Motorcycle Suspension

Find the correct TFX suspension setup for your motorcycle in less than 60 seconds.

Start Configuration

Related Articles

Experience perfect handling. Configure your TFX suspension now.

Wat gebeurt er als ik na de vakantie vergeet de preload terug te draaien?

FIND MY VEHICLE